EXFO MAX-890 - Page 214

Test Results
206 MAX-800 Series
Alarms/Errors Overview
The following table lists the availability of alarms/errors per layer for
TX and RX.
Layer
Alarms/Errors
Page
TX/RX RX only
BER Pattern Loss No Traffic 208
Bit Error, Pattern Error Mismatch ‘0’, Mismatch ‘1’,
Frame Loss, Out-of-Seq.
CLOCK - LOC, LOPPS-L, LOPPS-R 209
DS1 AIS. OOF, RAI -210
CRC-6, Framing Bit -
DS3 AIS, Idle, OOF, RDI -211
CP-BIT, FEBE, F-Bit, P-Bit -
E1 AIS, LOF, RAI, LOMF, RAI MF, TS16 AIS -212
FAS CRC-4, E-Bit
E2
E3
E4
AIS, LOF, RAI - 213
214
215
FAS -
Ethernet Link Down, Remote Fault, Local Fault
a
Hi-BER, Local Fault Det.,
Local Fault Rcd.
216
Block, FCS, Symbol Alignment, False Carrier, Idle,
Jabber, Oversize, Runt, Undersize
Ethernet -
PCS
- LOA, Inv. Mapping 219
- -
Ethernet -
PCS (Lanes)
-LOBL, LOAML, Exc. Skew 220
Block, Inv. Marker, PCS BIP-8 -
FEC (OTN) FEC-CORR-BIT, FEC-CORR-CW,
FEC-CORR-SYM, FEC-STRESS,
FEC-UNCORR-CW
FEC-UNCORR-BIT,
FEC-UNCORR-SYM
222
FEC Lanes - FEC-LOAML, Pre-FEC-SYMB 238
Interface LOS LOC Lane, Frequency, LOC 223
BPV, EXZ, CV
IP/UDP/TCP - IP Chksum, UDP Chksum,
TCP Chksum
226
ODUx AIS, OCI, LCK, BDI, FSF, BSF, FSD, BSD TIM 227
BEI, BIP-8 -