Physical Interfaces and LEDs
MaxTester 15
Port Availability
890/890Q
The following table shows the list of available ports as well as a description
and signals supported on both models.
Connector Labelled
a
a. The ports are listed/referred as follows in the GUI: Port, unit‘s port (A or B), transceiver port (1 or 2), and
connector type; for example Port B1 - SFP28.
Supported Signal(s)
QSFP28
Dual QSFP28
transceivers
A 1 Ethernet 100 Gbit/s
OTU4
2
SFP28
Dual
SFP/SFP+/SFP28
transceivers
B 1 Ethernet 100/1000 Mbit/s, 10 Gbit/s optical
Ethernet 10/100/1000 Mbit/s electrical (using active copper SFP)
OC-1/STM-0, OC-3/STM-1, OC-12/STM-4, OC-48/STM-16, OC-192/STM-64
OTU1, OTU2
2
To Next Page
Loading...
