EasyManua.ls Logo

EXFO MAX-890 - Page 241

EXFO MAX-890
495 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Test Results
MaxTester 233
Alarms/Errors Overview
OTL
Alarms
LOL (Loss of Lane Alignment)
RX: Multilane alignment process is in the out-of-alignment (OLA) state
for 3 ms.
LOF (Loss of Frame)
RX: OOF is present for at least 3 ms.
OOF (Out-Of-Frame)
RX: Any byte of the FAS (bytes 3, 4, and 5) is in error for at least 5
consecutive frames.
LOR (Loss Of Recovery)
RX: When OOR persists at least 3 ms.
OOR (Out-Of-Recovery)
RX: While in In-recovery (IR) state, in five consecutive 16320 byte
periods each of the received logical lane marker (LLM) is different
from the accepted LLM value.
Exc. Skew (Excessive Skew)
RX: The skew exceeds the defined threshold (see Skew Alarm
Threshold (bits) on page 318).
Errors
FAS (Frame Alignment Signal)
RX: The FAS bits are in error.
Inv. Marker (Invalid Marker)
RX: Errors are detected in the 66-bit block alignment marker.

Table of Contents

Related product manuals