Test Control
MaxTester 401
Save/Load Button
Import/Export Tab
Configuration files can be transferred to and from an external USB media
as well as deleted.
Tap the Save/Load button and the Import/Export tab.
To import/export a test configuration:
1. Select the source file location (see File location on page 398).
2. From the Copy To drop list, select a destination file location.
3. Select the file(s) to be copied by selecting its corresponding check box
or tap the (Un)Select All button to select or unselect all files in the list.
4. Tap the Copy button.
5. A confirmation is displayed, tap OK.
To delete a test configuration:
1. Select the file location (see File location on page 398).
2. Select the file(s) to be deleted by selecting its corresponding check
box or tap the (Un)Select All button to select or unselect all files in the
list.
3. Tap the Delete button.
4. Tap YES to confirm the deletion.
To Next Page
Loading...
