Extron electronics IN1806 Series - Disabling Compatibility Mode; Web Page Components

IN1806 and IN1808 Series Scaling Presentation Switchers • Internal Web Pages 103
6. Enter the password.
NOTE: The factory configured passwords for all accounts on this device have been
set to the device serial number. Passwords are case sensitive.
To change the password, see Setting a password on page 106.
7. Click the Sign In button.
Disabling Compatibility Mode
The internal web page does not support compatibility mode in Microsoft Internet Explorer.
To check compatibility view settings:
From the Tools menu of the browser, select Compatibility View Settings. The
Compatibility View Settings dialog box opens.
Be sure that the Display all websites in Compatibility View checkbox is clear, and
that the IP address of the scaler is not in the list of websites that have been added to
Compatibility View.
Web Page Components
1
Device Info Panel
4
Device Status Panel
7
Network Settings Panel
2
Inputs Panel
5
Outputs Panel
8
RS-232 Panel
3
Roles and
6
Firmware Panel
Permissions Panel
Figure 47. Internal Web Page
47