Installation manual
CNC 8060
CNC 8065
MACHINE PARAMETERS.
2.
(REF: 1402)
·171·
Machine parameters for JOG mode.
2.7.1 Example of how to set the handwheels and jog keys.
Handwheel setting.
On a machine with X, Y, Z and A axes, we would like an individual handwheel for the X axis,
an individual handwheel for the Y and a general handwheel for the Z and A axes.
• Individual handwheel for the X axis.
Feedback input: keyboard (MPG1).
Disk graduated with 100 lines
Pulses/ turn: 100
Resolutions (X): 0.001, 0.01, 0.1
• Individual handwheel for the Y axis.
Feedback input: keyboard (MPG2).
Disk graduated with 100 lines
Pulses/ turn: 200
Resolutions (Y): 0.001, 0.01, 0.1
• General handwheel for the rest of the axes (Z, A).
Feedback input: Counter (X1).
Disk graduated with 100 lines
Pulses/ turn: 100
Resolutions (Z): 0.001, 0.01, 0.1
Resolutions (A): 0.01, 0.1, 1
Parameter setting:
X axis handwheel (MANPG 1).
Y axis handwheel (MANPG 2).
Machine parameter. Value. Meaning.
NMPG 3 3-handwheel system.
Machine parameter. Value. Meaning.
COUNTERTYPE Keyboard. Han dw heel connected to the
keyboard.
COUNTERID -1 MPG1 connector.
MPGAXIS X Associated axis.
MPGRESOL 1 0.001 Resolution 0.001
MPGRESOL 10 0.01 Resolution 0.01
MPGRESOL 100 0.1 Resolution 0.1
Machine parameter. Value. Meaning.
COUNTERTYPE Keyboard. Han dw heel connected to the
keyboard.
COUNTERID -2 MPG2 connector.
MPGAXIS Y Associated axis.
MPGRESOL 1 0.0005 Resolution 0.001
MPGRESOL 10 0.005 Resolution 0.01
MPGRESOL 100 0.05 Resolution 0.1
To Next Page
Loading...
