·736·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
PLC modifiable logic signals; keys.
10.25 PLC modifiable logic signals; keys.
(V.)PLC.KEYLED1
(V.)PLC.KEYLED2
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
These registers control the LED's (lamps) of the keys of all the operator panels at the same
time.
(V.)PLC.KEYLED1_1
(V.)PLC.KEYLED2_1
··
(V.)PLC.KEYLED1_8
(V.)PLC.KEYLED2_8
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
These registers control the LED's (lamps) of the keys of each operator panel. Registers
KEYLED1_1 and KEYLED2_1 correspond to the first jog panel, KEYLED1_2 and
KEYLED2_2 to the second one and so on.
(V.)PLC.KEYDIS1
(V.)PLC.KEYDIS2
(V.)PLC.KEYDIS3
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
These registers inhibit (bit=1) the keys and the switches on all operator panels at the same
time.
(V.)PLC.KEYDIS1_1
(V.)PLC.KEYDIS2_1
(V.)PLC.KEYDIS3_1
··
(V.)PLC.KEYDIS1_8
(V.)PLC.KEYDIS2_8
(V.)PLC.KEYDIS3_8
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
These registers inhibit (bit=1) the keys and the switches on each operator panel. Registers
KEYDIS1_1 to KEYDIS3_1 correspond to the first jog panel, KEYDIS1_2 to KEYDIS3_2 to
the second one and so on.
V.PLC.KEYLED1
V.PLC.KEYLED2
V.PLC.KEYLED1_1
V.PLC.KEYLED2_1
V.PLC.KEYDIS1
V.PLC.KEYDIS2
V.PLC.KEYDIS3
V.PLC.KEYDIS1_1
V.PLC.KEYDIS2_1
V.PLC.KEYDIS3_1
To Next Page
Loading...
