Fagor CNC 8065 - Variables Associated with the Status and Resources of the PLC

·686·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables associated with the status and resources of the PLC.
10.13 Variables associated with the status and resources of the PLC.
PLC STATUS.
(V.)PLC.STATUS
Variable that can only be read from the program and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
PLC status.
Values of the variable.
This variable returns one of the following values.
PLC RESOURCES.
(V.)PLC.I[nb]
Variable that can be read and written via program and interface.
The variable returns the execution value; reading it interrupts block preparation.
Status of PLC digital input [nb].
Syntax.
·nb· Number of the digital input.
(V.)PLC.O[nb]
Variable that can be read and written via program and interface.
The variable returns the execution value; reading it interrupts block preparation.
Status of PLC digital output [nb].
Syntax.
·nb· Number of the digital output.
(V.)PLC.LI[nb]
Variable that can be read and written via program and interface.
The variable returns the execution value; reading it interrupts block preparation.
Status of PLC local digital input [nb].
Syntax.
·nb· Number of the digital input.
V.PLC.STATUS
Value. Meaning.
0 PLC stopped.
1 PLC running.
V.PLC.I[122] Status of PLC digital input ·122·.
V.PLC.O[243] Status of PLC digital output ·243·.
V.PLC.LI[2] Status of PLC local digital input ·2·.