Fagor CNC 8065 - PLC Modifiable Logic Signals; General

·714·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
PLC modifiable logic signals; general.
10.20 PLC modifiable logic signals; general.
(V.)PLC._EMERGEN
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
If the PLC turns this mark off, the channel stops the axes and spindles and issues an error
message.
While the mark is off, the channel does not allow executing programs and aborts attempt
to move the axes or start the spindle.
(V.)PLC._STOP
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
If the PLC turns this mark off, the channel stops the execution of the program, but keeps the
spindles turning. The status of this mark does not affect the independent axes.
(V.)PLC._XFERINH
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
If the PLC turns this mark off, the prevents the execution of the next block, but it lets complete
the execution of the current block.
(V.)PLC._FEEDHOL
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
If the PLC turns this mark off, the channel stops the axes, but keeps the spindles turning.
The status of this mark does not affect the independent axes.
V.PLC._EMERGEN Channel ·1·.
V.PLC._EMERGENC1 Channel ·1·.
V.PLC._EMERGENC2 Channel ·2·.
V.PLC._EMERGENC3 Channel ·3·.
V.PLC._EMERGENC4 Channel ·4·.
V.PLC._STOP Channel ·1·.
V.PLC._STOPC1 Channel ·1·.
V.PLC._STOPC2 Channel ·2·.
V.PLC._STOPC3 Channel ·3·.
V.PLC._STOPC4 Channel ·4·.
V.PLC._XFERINH Channel ·1·.
V.PLC._XFERINHC1 Channel ·1·.
V.PLC._XFERINHC2 Channel ·2·.
V.PLC._XFERINHC3 Channel ·3·.
V.PLC._XFERINHC4 Channel ·4·.
V.PLC._FEEDHOL Channel ·1·.
V.PLC._FEEDHOLC1 Channel ·1·.
V.PLC._FEEDHOLC2 Channel ·2·.
V.PLC._FEEDHOLC3 Channel ·3·.
V.PLC._FEEDHOLC4 Channel ·4·.