Fagor CNC 8065 - Interface Related Variables

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·895·
Interface related variables.
10.61 Interface related variables.
(V.)[ch].E.PROGSELECT
Variable that can be read and written via program, PLC and interface.
Report variable (to be used from the scripts).
Name of the program selected in automatic.
This variable can only be written with the value of ·0· to eliminate the program selected in
automatic mode. When simulating the program, writing this variable has no effect.
Syntax.
·ch· Channel number.
(V.)E.COMPONENTNAME
Variable to be read via interface.
Report variable (to be used from the scripts).
Component name.
(V.)[ch].E.MMCMODE
Variable to be read via interface.
Report variable (to be used from the scripts).
Syntax.
·ch· Channel number.
(V.)E.NERRORS
Variable to be read via interface.
Report variable (to be used from the scripts).
Number of errors at the CNC.
(V.)E.ERRORPRI
Variable to be read via interface.
Report variable (to be used from the scripts).
Error priority.
(V.)[ch].E.MANUALMODE
Variable to be read via interface.
Report variable (to be used from the scripts).
Exclusive jog mode active.
Syntax.
·ch· Channel number.
[2].E.PROGSELECT Channel ·2·.
G.COMPONENTNAME
[2].E.MMCMODE Channel ·2·.
G.NERRORS
G.ERRORPRI
[2].E.MANUALMODE Channel ·2·.