Fagor CNC 8065 - Variables Related to the Machine Configuration

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·737·
Variables related to the machine configuration.
10.26 Variables related to the machine configuration.
AXES AND SPINDLES OF THE SYSTEM.
(V.)G.GAXISNAMEn
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
Name of logic axis "n".
Syntax.
Replace the "n" letter with the axis logic number.
Values of the variable.
The values returned by this variable are encoded as follows.
Remarks.
The logic number of the axes is determined by the order in which the axes have been defined
in the machine parameter table. The first axis of the table will be logic axis -1- and so on.
When some axes are parked, it is a good idea to know which axes are available. This variable
indicates which axes are available, if an axis is not available, this variable returns a "?".
(V.)G.GSPDLNAMEn
Variable that can only be read from the program, PLC and interface.
The variable returns the value of execution or preparation depending on the spindle.
Report variable (to be used from the scripts).
Name of logic spindle "n".
Syntax.
Replace the "n" letter with the spindle logic number.
Values of the variable.
The values returned by this variable are encoded as follows.
Remarks.
The variable returns the value of execution or preparation as follows. If the spindle belongs
to the channel requesting the variable, it returns the preparation value; if the spindle belongs
to a different channel, the variable returns the execution value and interrupts block
preparation.
V.G.GAXISNAME2 Axis with logic number ·2·.
X=10 X1=11 X2=12 X3=13 X4=14 ... X9=19
Y=20 Y1=21 Y2=22 Y3=23 Y4=24 ... Y9=29
Z=30 Z1=31 Z2=32 Z3=33 Z4=34 ... Z9=39
U=40 U1=41 U2=42 U3=43 U4=44 ... U9=49
V=50 V1=51 V2=52 V3=53 V4=54 ... V9=59
W=60 W1=61 W2=62 W3=63 W4=64 ... W9=69
A=70 A1=71 A2=72 A3=73 A4=74 ... A9=79
B=80 B1=81 B2=82 B3=83 B4=84 ... B9=89
C=90 C1=91 C2=92 C3=93 C4=94 ... C9=99
V.G.GSPDLNAME2 Spindle with logic number ·2·.
S=100 S1=101 S2=102 S3=103 S4=104 ... S9=109