Fagor CNC 8065 - Page 896

·896·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Interface related variables.
(V.)E.CALCRESUL
Variable to be read via interface.
Report variable (to be used from the scripts).
Result of the calculator.
(V.)E.NUMJOGPANELS
Variable to be read via interface.
Number of jog panels.
(V.)E.HELPDATA
Variable that can be read and written from the interface.
Report variable (to be used from the scripts).
Mark of the help file corresponding to the help page.
(V.)E.CNCMSG
Variable to be read via interface.
Report variable (to be used from the scripts).
Error text.
(V.)[ch].E.PATHSELECT
Variable to be read via interface.
Report variable (to be used from the scripts).
Path of the program selected in automatic.
Syntax.
·ch· Channel number.
(V.)[ch].E.CMPNTNUMBER
Variable to be read via interface.
Report variable (to be used from the scripts).
Component where the channel is.
Syntax.
·ch· Channel number.
(V.)[ch].E.PAGENUMBER
Variable to be read via interface.
Report variable (to be used from the scripts).
Page where the channel is.
Syntax.
·ch· Channel number.
G.CALCRESULT
G.NUMJOGPANELS
G.HELPDATA
G.CNCMSG
[2].E.PATHSELECT Channel ·2·.
[2].E.CMPNTNUMBER Channel ·2·.
[2].E.PAGENUMBER Channel ·2·.