Fagor CNC 8065 - Page 192

·192·
Installation manual
CNC 8060
CNC 8065
2.
MACHINE PARAMETERS.
(REF: 1402)
Machine parameters for kinetics.
TDATA12
Manual rotary axes or servo-controlled.
Possible values: 0 to 3.
Default value: 0.
This parameter indicates whether the rotary axes are manual or servo-controlled.
TDATA13··TDATA15
Spindle placement.
TDATA12 Meaning.
0 The two axes are servo-controlled.
1 Main axis manual and secondary axis servo-controlled.
2 Main axis servo-controlled and secondary axis manual.
3 The two axes are manuals.
TDATA13 Distance defining the spindle placement, from the rotary axis, along the X axis.
TDATA14 Distance defining the spindle placement, from the rotary axis, along the Y axis.
TDATA15 Distance defining the spindle placement, from the rotary axis, along the Z axis.