Fagor CNC 8065 - Page 196

·196·
Installation manual
CNC 8060
CNC 8065
2.
MACHINE PARAMETERS.
(REF: 1402)
Machine parameters for kinetics.
TDATA17
Turning direction of the main rotary axis.
Possible values: 0 (by the standard DIN 66217) / 1 / opposite to the standard DIN 66217).
Default value: 0.
See parameter TDATA18.
TDATA18
Turning direction of the secondary rotary axis.
Possible values: 0 (by the standard DIN 66217) / 1 / opposite to the standard DIN 66217).
Default value: 0.
The direction of the XYZ axes, according to the DIN 66217 standard is easy to remember
using the rule of the right hand. On rotary axes, the turning direction is established when
bending your fingers (closing your hand) around the associated linear axis while your thumb
is pointing in the positive direction of the linear axis.
TDATA19
Manual rotary axes or servo-controlled.
Possible values: 0 to 7.
Default value: 0.
This parameter indicates whether the rotary axes are manual or servo-controlled.
TDATA12 Meaning.
0 The three axes are servo-controlled.
1 Main axis manual and the rest servo-controlled.
2 Secondary axis manual and the rest servo-controlled.
3 Main axis and secondary axis manual, the third axis servo-controlled.
4 Third axis manual and the rest servo-controlled.
5 Main axis and third axis manual, the secondary axis servo-controlled.
6 Secondary axis and third axis manual, the main axis servo-controlled.
7 All the axes are manual.