·344·
Installation manual
CNC 8060
CNC 8065
7.
TOOL AND MAGAZINE MANAGEMENT.
(REF: 1402)
Types of tool magazine.
In any case and even when all the magazines are random, the tools are always stored in
the same magazine from which they were picked up.
"Cyclic" or "Non-Cyclic" magazine
A cyclic magazine requires a tool change command M06 after searching a tool and before
searching the next one. In a non-cyclic magazine, it is possible to perform several
consecutive tool searches without necessarily having to change the tool.
To Next Page
Loading...
