·44·
Installation manual
CNC 8060
CNC 8065
2.
MACHINE PARAMETERS.
(REF: 1402)
Parameter matching between the CNC and the Sercos drive.
I0TYPE PP115 (bit 1,5) External. B1=0 B5=0; If distance-coded I0.
B1=1 B5=0; if increasing distance-coded I0.
B1=1 B5=1; if decreasing distance-coded I0.
I0CODDI1
I0CODDI2
NP166
NP165
Only when using distance-coded I0's.
Only when using distance-coded I0's.
REFDIREC
DECINPUT
FBACKSRC
PP147 (bit 0)
PP147 (bit 5)
PP147 (bit 3)
PP147 (bit 1)
B0=0; Positive home search direction.
B0=1; Negative home search direction.
B5=0; A home switch is being used.
B5=1; A home switch is not being used.
B3=0; Internal feedback.
B3=1; External feedback.
B1=0; The DECEL signal of the CNC is always
positive.
REFFEED1 PP41
REFFEED2 PP1
REFVALUE PP52
PP54
Position.
Position.
Internal.
External.
REFSHIFT PP150
PP151
Position.
Position.
Internal.
External.
ABSOFF PP177
PP178
Internal.
External.
Only when using distance-coded I0's or
absolute feedback.
PROGAIN PP104
BACKLASH PP58 Position.
BACKANOUT PP2 Position.
BACKTIME PP3 Position. Only if BACKANOUT<>0
REVEHYST PP15
PEAKDISP PP14
NPARSETS GP6
Activate software
limits.
PP55 (bit 4) B4=1; Check the limits.
B4=0; Ignore the limits (for spindles, rotary axes
with module and when both parameters LIMIT+
and LIMIT- are set to 0).
MODLIMUP PP103 Only if it is a spindle or a rotary axis with module.
SZERO SP42 Only if it is a spindle.
INPOSW PP57
MAXFLWE PP159 Only if following error monitoring is active.
Calculation of the
coordinate
module.
PP76 (bit 7) B7=0; On rotary axes or spindles working in
velocity-Sercos, the CNC calculates the
module of the coordinate.
CNC DRIVE Sercos Feedback Remarks
To Next Page
Loading...
