Fagor CNC 8065 - Page 575

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·575·
Variables related to the machine parameters of the channels.
(V.)[ch].MPG.PRB3MIN
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Minimum probe coordinate (axis perpendicular to the plane).
Syntax.
·ch· Channel number.
(V.)[ch].MPG.PRB3MAX
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Maximum probe coordinate (axis perpendicular to the plane).
Syntax.
·ch· Channel number.
BLOCK SEARCH.
(V.)[ch].MPG.FUNPLC
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Send the M, H, S functions to the PLC during block search.
Syntax.
·ch· Channel number.
Values of the variable.
This variable returns one of the following values.
INTERRUPTION SUBROUTINES.
(V.)[ch].MPG.SUBINTSTOP
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Channel [ch]. Execute interruption subroutines while the program is stopped or while no
program is in execution.
Syntax.
·ch· Channel number.
V.[2].MPG.PRB3MIN Channel ·2·.
V.[2].MPG.PRB3MAX Channel ·2·.
V.[2].MPG.FUNPLC Channel ·2·.
Value. Meaning.
0No.
1Yes.
V.[2].MPG.SUBINTSTOP Channel ·2·.