Fagor CNC 8065 - Page 585

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·585·
Variables related to axis and spindle machine parameters.
HIRTH AXIS CONFIGURATION.
(V.)[ch].MPA.HIRTH.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Hirth toothed axis.
A Hirth axis is the one that can only be positioned at positions multiple of a given value.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.HPITCH.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Hirth axis pitch.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
AXIS CONFIGURATION FOR LATHE TYPE MACHINES.
(V.)[ch].MPA.FACEAXIS.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Cross axis on a lathe.
Syntax.
·ch· Channel number.
V.MPA.HIRTH.Z Z axis.
V.MPA.HIRTH.4 Axis with logic number ·4·.
V.[2].MPA.HIRTH.1 Axis with index ·1· in the channel ·2·.
Value. Meaning.
0No.
1Yes.
V.MPA.HPITCH.Z Z axis.
V.MPA.HPITCH.4 Axis with logic number ·4·.
V.[2].MPA.HPITCH.1 Axis with index ·1· in the channel ·2·.