Fagor CNC 8065 - Page 588

·588·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to axis and spindle machine parameters.
MODULE CONFIGURATION (ROTARY AXES AND SPINDLE).
(V.)[ch].MPA.MODCOMP.xn
(V.)[ch].MPA.MODCOMP.sn
(V.)[ch].SP.MODCOMP.sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified during setup.
Variable valid for rotary axes and spindles.
Variable valid for analog drives and velocity-Sercos drives.
The variable returns the execution value; reading it interrupts block preparation.
Channel [ch]. Module compensation.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Values of the variable.
This variable returns one of the following values.
CONFIGURATION OF THE C AXIS.
(V.)[ch].MPA.CAXIS.xn
(V.)[ch].MPA.CAXIS.sn
(V.)[ch].SP.CAXIS.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary axes and spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Possibility of working as C axis.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA.MODCOMP.Z Z axis.
V.MPA.MODCOMP.S Spindle S.
V.SP.MODCOMP.S Spindle S.
V.SP.MODCOMP Master spindle.
V.MPA.MODCOMP.4 Axis or spindle with logic number ·4·.
V.[2].MPA.MODCOMP.1 Axis with index ·1· in the channel ·2·.
V.SP.MODCOMP.2 Spindle with index ·2· in the system.
V.[2].SP.MODCOMP.1 Spindle with index ·1· in the channel ·2·.
Value. Meaning.
0No.
1Yes.
V.MPA .CAXIS.Z Z axis.
V.MPA .CAXIS.S Spindle S.
V.SP.CAXIS.S Spindle S.
V.SP.CAXIS Master spindle.
V.MPA .CAXIS.4 Axis or spindle with logic number ·4·.