Fagor CNC 8065 - Page 594

·594·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to axis and spindle machine parameters.
Remarks.
The reading from the PLC will be given in tenths (x10); i.e. if the parameter value is ·10·, the
PLC reading will return a value of ·100·.
(V.)[ch].MPA.MAXOVR.sn
(V.)[ch].SP.MAXOVR.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Maximum override (%) permitted for the spindle.
Syntax.
·ch· Channel number.
·sn· Name, logic number or index of the spindle.
Remarks.
The reading from the PLC will be given in tenths (x10); i.e. if the parameter value is ·10·, the
PLC reading will return a value of ·100·.
SYNCHRONIZATION OF AXES AND SPINDLES.
(V.)[ch].MPA.SYNCSET.xn
(V.)[ch].SP.SYNCSET.sn
(V.)[ch].SP.SYNCSET.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary axes and spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Set of parameters for synchronization.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA.MINOVR.4 Spindle with logic number ·4·.
V.SP.MINOVR.2 Spindle with index ·2· in the system.
V.[2].SP.MINOVR.1 Spindle with index ·1· in the channel ·2·.
V.MPA.MAXOVR.S Spindle S.
V.SP.MAXOVR.S Spindle S.
V.SP.MAXOVR Master spindle.
V.MPA.MAXOVR.4 Spindle with logic number ·4·.
V.SP.MAXOVR.2 Spindle with index ·2· in the system.
V.[2].SP.MAXOVR.1 Spindle with index ·1· in the channel ·2·.
V.MPA.SYNCSET.Z Z axis.
V.MPA.SYNCSET.S Spindle S.
V.SP.SYNCSET.S Spindle S.
V.SP.SYNCSET Master spindle.
V.MPA.SYNCSET.4 Axis or spindle with logic number ·4·.
V.[2].MPA.SYNCSET.1 Axis with index ·1· in the channel ·2·.
V.SP.SYNCSET.2 Spindle with index ·2· in the system.
V.[2].SP.SYNCSET.1 Spindle with index ·1· in the channel ·2·.