Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·605·
Variables related to axis and spindle machine parameters.
·xn· Name, logic number or index of the axis.
(V.)[ch].MPA.JOGRAPFEED.xn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified during setup.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the execution value; reading it interrupts block preparation.
Channel [ch]. Rapid feedrate in continuous jog.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].MPA.MAXMANFEED.xn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified during setup.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the execution value; reading it interrupts block preparation.
Channel [ch]. Maximum feedrate in continuous jog.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].MPA.MAXMANACC.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Channel [ch]. Maximum acceleration in continuous JOG.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
V.MPA.JOGFEED.Z Z axis.
V.MPA.JOGFEED.4 Axis with logic number ·4·.
V.[2].MPA.JOGFEED.1 Axis with index ·1· in the channel ·2·.
V.MPA.JOGRAPFEED.Z Z axis.
V.MPA.JOGRAPFEED.4 Axis with logic number ·4·.
V.[2].MPA.JOGRAPFEED.1 Axis with index ·1· in the channel ·2·.
V.MPA.MAXMANFEED.Z Z axis.
V.MPA.MAXMANFEED.4 Axis with logic number ·4·.
V.[2].MPA.MAXMANFEED.1 Axis with index ·1· in the channel ·2·.
V.MPA.MAXMANACC.Z Z axis.
V.MPA.MAXMANACC.4 Axis with logic number ·4·.
V.[2].MPA.MAXMANACC.1 Axis with index ·1· in the channel ·2·.
To Next Page
Loading...
