Fagor CNC 8065 - Page 621

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·621·
Variables related to the sets of machine parameters.
(V.)[ch].MPA.SINMAGNI[set].xn
(V.)[ch].MPA.SINMAGNI[set].sn
(V.)[ch].SP.SINMAGNI[set].sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified during setup.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the execution value; reading it interrupts block preparation.
Multiplying factor for sinusoidal feedback signal.
For square feedback signals, it will be set to ·0·; the CNC applies a x4 factor.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].MPA.ABSFEEDBACK[set].xn
(V.)[ch].MPA.ABSFEEDBACK[set].sn
(V.)[ch].SP.ABSFEEDBACK[set].sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified during setup.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the execution value; reading it interrupts block preparation.
Absolute feedback system.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA.SINMAGNI[3].Z Z axis.
V.MPA.SINMAGNI[3].S Spindle S.
V.SP.SINMAGNI[3].S Spindle S.
V.SP.SINMAGNI[3] Master spindle.
V.MPA.SINMAGNI[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.SINMAGNI[3].1 Axis with index ·1· in the channel ·2·.
V.SP.SINMAGNI[3].2 Spindle with index ·2· in the system.
V.[2].SP.SINMAGNI[3].1 Spindle with index ·1· in the channel ·2·.
V.MPA.ABDFEEDBACK[3].Z Z axis.
V.MPA.ABDFEEDBACK[3].S Spindle S.
V.SP.ABDFEEDBACK[3].S Spindle S.
V.SP.ABDFEEDBACK[3] Master spindle.
V.MPA.ABDFEEDBACK[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.ABDFEEDBACK[3].1 Axis with index ·1· in the channel ·2·.
V.SP.ABDFEEDBACK[3].2 Spindle with index ·2· in the system.
V.[2].SP.ABDFEEDBACK[3].1 Spindle with index ·1· in the channel ·2·.