Fagor CNC 8065 - Page 638

·638·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the sets of machine parameters.
ENABLE SPECIFIC ACCELERATION VALUES FOR
MOVEMENTS IN G0.
(V.)[ch].MPA.G0ACDCJERK[set].xn
(V.)[ch].MPA.G0ACDCJERK[set].sn
(V.)[ch].SP.G0ACDCJERK[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the execution value; reading it interrupts block preparation.
More parameters if G0.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Values of the variable.
This variable returns one of the following values.
LINEAR ACCELERATION (G0 MOVEMENTS).
(V.)[ch].MPA.LACC1G0[set].xn
(V.)[ch].MPA.LACC1G0[set].sn
(V.)[ch].SP.LACC1G0[set].sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified from the environment of the oscilloscope and setup.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the execution value; reading it interrupts block preparation.
Acceleration of the first section (G0 movements).
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA.G0ACDCJERK[3].Z Z axis.
V.MPA.G0ACDCJERK[3].S Spindle S.
V.SP.G0ACDCJERK[3].S Spindle S.
V.SP.G0ACDCJERK[3] Master spindle.
V.MPA.G0ACDCJERK[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.G0ACDCJERK[3].1 Axis with index ·1· in the channel ·2·.
V.SP.G0ACDCJERK[3].2 Spindle with index ·2· in the system.
V.[2].SP.G0ACDCJERK[3].1 Spindle with index ·1· in the channel ·2·.
Value. Meaning.
0No.
1Yes.
V.MPA.LACC1G0[3].Z Z axis.
V.MPA.LACC1G0[3].S Spindle S.
V.SP.LACC1G0[3].S Spindle S.