Fagor CNC 8065 - Page 650

·650·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the sets of machine parameters.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].MPA.I0CODDI2[set].xn
(V.)[ch].MPA.I0CODDI2[set].sn
(V.)[ch].SP.I0CODDI2[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Pitch between 2 variable distance-coded reference marks.
Syntax.
·ch· Channel number.
·set· Parameter set.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
FOLLOWING ERROR.
(V.)[ch].MPA.FLWEMONITOR[set].xn
(V.)[ch].MPA.FLWEMONITOR[set].sn
(V.)[ch].SP.FLWEMONITOR[set].sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for analog drive, position Sercos and velocity Sercos.
The variable returns the value of block preparation.
Type of monitoring of the following error (axis lag).
The CNC offers two types of monitoring of the following error (axis lag). The "standard"
monitoring type performs a continuous supervision of the following error whereas the "linear"
monitoring performs a dynamic supervision
Syntax.
·ch· Channel number.
V.MPA.I0CODDI1[3].Z Z axis.
V.MPA.I0CODDI1[3].S Spindle S.
V.SP.I0CODDI1[3].S Spindle S.
V.SP.I0CODDI1[3] Master spindle.
V.MPA.I0CODDI1[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.I0CODDI1[3].1 Axis with index ·1· in the channel ·2·.
V.SP.I0CODDI1[3].2 Spindle with index ·2· in the system.
V.[2].SP.I0CODDI1[3].1 Spindle with index ·1· in the channel ·2·.
V.MPA.I0CODDI2[3].Z Z axis.
V.MPA.I0CODDI2[3].S Spindle S.
V.SP.I0CODDI2[3].S Spindle S.
V.SP.I0CODDI2[3] Master spindle.
V.MPA.I0CODDI2[3].4 Axis or spindle with logic number ·4·.
V.[2].MPA.I0CODDI2[3].1 Axis with index ·1· in the channel ·2·.
V.SP.I0CODDI2[3].2 Spindle with index ·2· in the system.
V.[2].SP.I0CODDI2[3].1 Spindle with index ·1· in the channel ·2·.