Fagor CNC 8065 - Page 683

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·683·
Variables related to machine parameters for the tool magazine.
Values of the variable.
This variable returns one of the following values.
(V.)TM.MZRESPECTSIZE[mz]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Tool magazine [mz]. In the random magazine, look for pockets of the same size.
Syntax.
·mz· Type of tool magazine.
(V.)TM.MZM6ALONE[mz]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Tool magazine [mz]. Action after executing an M6 without having selected a tool.
Syntax.
·mz· Type of tool magazine.
Values of the variable.
This variable returns one of the following values.
Value. Meaning.
0 The tool magazine has no optimized management.
1 The tool magazine has optimized management.
V.TM.MZRESPECTSIZE[2] Magazine ·2·.
V.TM.MZM6ALONE[2] Magazine ·2·.
Value. Meaning.
0 No action is carried out.
1 The CNC issues a warning.
2 The CNC issues an error message.