Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·705·
PLC consulting logic signals; axes and spindles.
Syntax.
·xn· Name or logic number of the axis.
·sn· Name or logic number of the spindle.
(V.)PLC.MAXDIFFxn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Gantry axis [nb]. The CNC cannot correct the position difference between the master axis
and the slave axis.
V.PLC.LOPENX X axis.
V.PLC.LOPENS Spindle S.
V.PLC.LOPEN3 Axis or spindle with logic number ·3·.
To Next Page
Loading...
