Fagor CNC 8065 - Page 764

·764·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to loop adjustment.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.TJERK.xn
(V.)[ch].A.TJERK.sn
(V.)[ch].SP.TJERK.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Theoretical instantaneous jerk value.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.JERK.xn
(V.)[ch].A.JERK.sn
(V.)[ch].SP.JERK.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Real instantaneous jerk value.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.A.ACCEL.Z Z axis.
V.A.ACCEL.S Spindle S.
V.SP.ACCEL.S Spindle S.
V.SP.ACCEL Master spindle.
V.A.ACCEL.4 Axis or spindle with logic number ·4·.
V.[2].A.ACCEL.1 Axis with index ·1· in the channel ·2·.
V.SP.ACCEL.2 Spindle with index ·2· in the system.
V.[2].SP.ACCEL.1 Spindle with index ·1· in the channel ·2·.
V.A.TJERK.Z Z axis.
V.A.TJERK.S Spindle S.
V.SP.TJERK.S Spindle S.
V.SP.TJERK Master spindle.
V.A.TJERK.4 Axis or spindle with logic number ·4·.
V.[2].A.TJERK .1 Axis with index ·1· in the channel ·2·.
V.SP.TJERK.2 Spindle with index ·2· in the system.
V.[2].SP.TJERK.1 Spindle with index ·1· in the channel ·2·.
V.A.JERK.Z Z axis.
V.A.JERK.S Spindle S.
V.SP.JERK.S Spindle S.
V.SP.JERK Master spindle.
V.A.JERK.4 Axis or spindle with logic number ·4·.
V.[2].A.JERK.1 Axis with index ·1· in the channel ·2·.
V.SP.JERK.2 Spindle with index ·2· in the system.
V.[2].SP.JERK.1 Spindle with index ·1· in the channel ·2·.