Fagor CNC 8065 - Page 768

·768·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the loop of the axis or of the tandem spindle.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.PRELOAD.xn
(V.)[ch].A.PRELOAD.sn
(V.)[ch].SP.PRELOAD.sn
Variable that can be read and written via program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Preload in the tandem.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.A.TFILTOUT.Z Z axis.
V.A.TFILTOUT.S Spindle S.
V.SP.TFILTOUT.S Spindle S.
V.SP.TFILTOUT Master spindle.
V.A.TFILTOUT.4 Axis or spindle with logic number ·4·.
V.[2].A.TFILTOUT.1 Axis with index ·1· in the channel ·2·.
V.SP.TFILTOUT.2 Spindle with index ·2· in the system.
V.[2].SP.TFILTOUT.1 Spindle with index ·1· in the channel ·2·.
V.A.PRELOAD.Z Z axis.
V.A.PRELOAD.S Spindle S.
V.SP.PRELOAD.S Spindle S.
V.SP.PRELOAD Master spindle.
V.A.PRELOAD.4 Axis or spindle with logic number ·4·.
V.[2].A.PRELOAD.1 Axis with index ·1· in the channel ·2·.
V.SP.PRELOAD.2 Spindle with index ·2· in the system.
V.[2].SP.PRELOAD.1 Spindle with index ·1· in the channel ·2·.