Fagor CNC 8065 - Page 809

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·809·
Variables related to managing the tool magazine and the tool
changer arm.
Remarks.
If the variable is missing the offset number, the variable will then refer to the first one.
TOOL LOCATION IN THE TOOL CHANGER ARM.
(V.)TM.TOOLCH1[mz]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
Tool in the first claw of the magazine arm [mz].
Syntax.
·mz· Type of tool magazine.
(V.)TM.TOOLCH2[mz]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
Tool in the second claw of the magazine arm [mz].
Syntax.
·mz· Type of tool magazine.
V.TM.TOOLCH1[2] Magazine ·2·.
V.TM.TOOLCH2[2] Magazine ·2·.