Fagor CNC 8065 - Page 818

·818·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the active tool and to the next one.
[odf] Tool offset; if missing, the active tool offset.
(V.)[ch].TM.TOTIPR[ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the active tool. Tip radius.
Syntax.
·ch· Channel number.
[odf] Tool offset; if missing, the active tool offset.
(V.)[ch].TM.TOWTIPR[ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the active tool. Tool tip radius wear.
Syntax.
·ch· Channel number.
[odf] Tool offset; if missing, the active tool offset.
(V.)[ch].TM.TOCUTL[ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the active tool. Cutting length.
Syntax.
·ch· Channel number.
[odf] Tool offset; if missing, the active tool offset.
(V.)[ch].TM.NOSEA[ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the active tool. Cutter angle.
Syntax.
·ch· Channel number.
[odf] Tool offset; if missing, the active tool offset.
V.[2].TM.TOAN Channel ·2·. Active tool offset.
V.[2].TM.TOAN[3] Channel ·2·. Tool offset ·3·.
V.[2].TM.TOTIPR Channel ·2·. Active tool offset.
V.[2].TM.TOTIPR[3] Channel ·2·. Tool offset ·3·.
V.[2].TM.TOWTIPR Channel ·2·. Active tool offset.
V.[2].TM.TOWTIPR[3] Channel ·2·. Tool offset ·3·.
V.[2].TM.TOCUTL Channel ·2·. Active tool offset.
V.[2].TM.TOCUTL[3] Channel ·2·. Tool offset ·3·.
V.[2].TM.NOSEA Channel ·2·. Active tool offset.
V.[2].TM.NOSEA[3] Channel ·2·. Tool offset ·3·.