Fagor CNC 8065 - Page 829

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·829·
Variables associated with any tool.
[odf] Tool offset; if missing, the active tool offset.
(V.)TM.TOTIPRT[tl][ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the [tl] tool. Tip radius.
Syntax.
·tl· Tool number.
[odf] Tool offset; if missing, the active tool offset.
(V.)TM.TOWTIPRT[tl][ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the [tl] tool. Tool tip radius wear.
Syntax.
·tl· Tool number.
[odf] Tool offset; if missing, the active tool offset.
(V.)TM.TOCUTLT[tl][ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the [tl] tool. Cutting length.
Syntax.
·tl· Tool number.
[odf] Tool offset; if missing, the active tool offset.
(V.)TM.NOSEAT[tl][ofd]
Variable that can be read and written via program, PLC(asynchronous writing) and interface.
The variable returns the execution value; reading it interrupts block preparation.
[odf] offset of the [tl] tool. Cutter angle.
Syntax.
·tl· Tool number.
[odf] Tool offset; if missing, the active tool offset.
V.TM.TOANT[23] Tool ·23·. Active tool offset.
V.TM.TOANT[23][3] Tool ·23·. Tool offset ·3·.
V.TM.TOTIPRT[23] Tool ·23·. Active tool offset.
V.TM.TOTIPRT[23][3] Tool ·23·. Tool offset ·3·.
V.TM.TOWTIPRT[23] Tool ·23·. Active tool offset.
V.TM.TOWTIPRT[23][3] Tool ·23·. Tool offset ·3·.
V.TM.TOCUTLT[23] Tool ·23·. Active tool offset.
V.TM.TOCUTLT[23][3] Tool ·23·. Tool offset ·3·.
V.TM.NOSEAT[23] Tool ·23·. Active tool offset.
V.TM.NOSEAT[23][3] Tool ·23·. Tool offset ·3·.