Fagor CNC 8065 - Page 833

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·833·
Variables associated with the tool being prepared.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].G.TLFN
Variable that can be read from the program.
The variable returns the value of block preparation.
Tool offset being prepared. Nominal life.
Syntax.
·ch· Channel number.
(V.)[ch].G.TLFR
Variable that can be read from the program.
The variable returns the value of block preparation.
Tool offset being prepared. Real (actual) life.
Syntax.
·ch· Channel number.
(V.)[ch].G.REMLIFE
Variable that can be read and written from the program.
The variable returns the value of block preparation.
Tool offset being prepared. Remaining life.
Syntax.
·ch· Channel number.
"CUSTOM" DATA OF THE TOOL.
(V.)[ch].G.TOTP1
(V.)[ch].G.TOTP2
(V.)[ch].G.TOTP3
(V.)[ch].G.TOTP4
Variable that can be read and written from the program.
The variable returns the value of block preparation.
Tool being prepared. Custom parameters.
Syntax.
·ch· Channel number.
Value. Meaning.
0 Without tool life monitoring.
1 Tool life monitoring; machining time.
2 Tool life monitoring; number of operations.
V.[2].G.TLFN Channel ·2·.
V.[2].G.TLFR Channel ·2·.
V.[2].G.REMLIFE Channel ·2·.
V.[2].G.TOTP1 Channel ·2·. Custom parameter ·1·.
V.[2].G.TOTP2 Channel ·2·. Custom parameter ·2·.
V.[2].G.TOTP3 Channel ·2·. Custom parameter ·3·.
V.[2].G.TOTP4 Channel ·2·. Custom parameter ·4·.