Fagor CNC 8065 - Page 836

·836·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables associated with the tool being prepared.
(V.)[ch].G.TOI
Variable that can be read and written from the program.
The variable returns the value of block preparation.
Tool being prepared. Radius wear.
This variable is not valid for turning tools.
Syntax.
·ch· Channel number.
(V.)[ch].G.TOL
Variable that can be read and written from the program.
The variable returns the value of block preparation.
Tool being prepared. Length.
This variable is not valid for turning tools.
Syntax.
·ch· Channel number.
(V.)[ch].G.TOK
Variable that can be read and written from the program.
The variable returns the value of block preparation.
Tool being prepared. Length wear.
This variable is not valid for turning tools.
Syntax.
·ch· Channel number.
(V.)[ch].G.TOAN
Variable that can be read and written from the program.
The variable returns the value of block preparation.
Tool being prepared. Penetration angle.
Syntax.
·ch· Channel number.
(V.)[ch].G.TOTIPR
Variable that can be read and written from the program.
The variable returns the value of block preparation.
Tool being prepared. Tip radius.
Syntax.
·ch· Channel number.
V.[2].G.TOI Channel ·2·.
V.[2].G.TOL Channel ·2·.
V.[2].G.TOK Channel ·2·.
V.[2].G.TOAN Channel ·2·.
V.[2].G.TOTIPR Channel ·2·.