Fagor CNC 8065 - Page 879

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·879·
Variables related to the independent axes.
Remarks.
The reading from the PLC will be given in hundredths (x100); i.e. if the parameter value is
·10·, the PLC reading will return a value of ·1000·.
(V.)[ch].A.SYNCERR.xn
(V.)[ch].A.SYNCERR.sn
(V.)[ch].SP.SYNCERR.sn
Variable that can be read and written via program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Synchronization error.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
COORDINATE LATCHING WITH THE HELP OF A PROBE OR A
DIGITAL INPUT.
(V.)[ch].A.LATCH1.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Machine coordinate obtained from latching probe 1 on the ·xn· axis.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
(V.)[ch].A.LATCH2.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Machine coordinate obtained from latching probe 2 on the ·xn· axis.
Syntax.
·ch· Channel number.
V.A.SYNCERR.Z Z axis.
V.A.SYNCERR.S Spindle S.
V.SP.SYNCERR.S Spindle S.
V.SP.SYNCERR Master spindle.
V.A.SYNCERR.4 Axis or spindle with logic number ·4·.
V.[2].A.SYNCERR.1 Axis with index ·1· in the channel ·2·.
V.SP.SYNCERR.2 Spindle with index ·2· in the system.
V.[2].SP.SYNCERR.1 Spindle with index ·1· in the channel ·2·.
V.A.LATCH1.Z Z axis.
V.A.LATCH1.4 Axis with logic number ·4·.
V.[2].A.LATCH1.1 Axis with index ·1· in the channel ·2·.