Fagor CNC 8065 - Page 9

Installation manual
CNC 8060
CNC 8065
(REF: 1402)
·9·
Software options (·T· model).
8060 T 8065 T 8065 T Power
Basic Pack 1 Basic Pack 1
Open system.
Access to the administrator mode.
- - - - - - - - - Option Option
Number of execution channels 2 1 1 to 2 1 to 2 1 to 4
Number of axes 3 a 5 3 to 5 5 to 7 5 to 12 8 to 28
Number of spindles 2 2 2 3 to 4 3 to 4
Number of tool magazines 2 1 1 to 2 1 to 2 1 to 4
Limited to 4 interpolated axes Option Option Option Option Option
IEC 61131 language - - - - - - Option Option Option
HD graphics Option Option Option Standard Standard
Conversational IIP Option Option Option Option Option
Dual-purpose machines (T-M) - - - - - - - - - Option Standard
"C" axis Option Option Standard Standard Standard
Dynamic RTCP - - - - - - - - - Option Standard
HSSA machining system. Option Option Standard Standard Standard
Probing canned cycles Option Option Standard Standard Standard
Tandem axes Option - - - Option Standard Standard
Synchronism and cams Option - - - Option Option Standard
Tangential control - - - - - - - - - Option Standard
Volumetric compensation (up to 10 m³). - - - - - - - - - Option Option
Volumetric compensation (more than 10 m³). - - - - - - - - - Option Option
ProGTL3 language. - - - - - - - - - - - - - - -
Part-program translator. Option - - - - - - - - - - - -