FARO
®
Laser Scanner Manual
100
Chapter 7: Controller Software
Network Name
The name of the network that the scanner will create. The scanner serial
number is used as the Network Name. Your remote device will display the
scanner with this name in the list of the wireless connections. If the scanner is
not listed, refresh the network list. After a few seconds the remote device will
find the scanner and display it in the list.
Scanner IP Address
The IP Address of the scanner is set. Use this IP to access the remote user
interface.
Update
Tap this button to update the displayed settings. This might be necessary, if a
connection is lost, for example, because the scanner was out of range.
Example configuration of a notebook with Microsoft Windows
Connecting the
scanner
1. Click the wireless network button on the bottom right of the task bar. A list
with the available wireless network connections appears.
2. Select the scanner network in this list (the scanner is listed with the above
mentioned network name).
3. Click the
Connect button.
4. When prompted, enter the WLAN encryption key.
Notebooks in ad hoc
mode
For the WLAN running in ad hoc mode, assign a static IP address to your
notebook.
To Next Page
Loading...
