FARO
®
Laser Scanner Manual
110
Chapter 7: Controller Software
Restore With this function you can
• restore operators, scan profiles, scanner parameters and wallpapers
from archived backups or scanner snapshots.
• import operators, profiles, and wallpapers that were newly created with
SCENE.
• import formerly backed up operators, profiles, and wallpapers that were
modified with SCENE.
• import operators, profiles, wallpapers, and scanner parameters from
other scanners.
To restore data, it must be saved to an SD card. For this, create a directory on
the SD card, named “Backup”, and then copy the folder with the data you want
to restore to this directory. If you use SCENE to create new or modify backed
up data, this will be done automatically by SCENE.
When finished, insert the SD card with the data you want to restore.
Figure 7-47: Service, Restore - Select Backup File
This screen shows you a list of all backup packages on the inserted SD card.
_AUTO_BACKUP is the automatically generated scanner snapshot (see
Backup on page 108). _SCENE_BACKUP is the scanner snapshot that has
been created or modified with SCENE. Tap on the backup package you want
to restore. A new screen will appear.
Select the data from the backup package you want to restore and tap the
Restore button to start the restore operation
NOTE: The number behind Operators and Profiles informs about
the number of operators, scan profiles and wallpapers on the
scanner.
NOTICE
The restored data will override existing data on the
scanner.
For example, if you want to restore or import scan profiles, all
the existing scan profiles on the scanner will be overridden by
the new profiles. The scanner's default profiles remain
unaffected from this operation. FARO recommends backing
up your data before restoring.
To Next Page
Loading...
