Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 141 of 254
61 -50 dBm <= rssi < -49 dBm
62 -49 dBm <= rssi < -48 dBm
63 -48 dBm <= rssi
99 not known or not detectable
<ber>:
Integer type. Channel bit error rate (in percent).
0...7 as RXQUAL values in the table in 3GPP TS 45.008 [20] subclause 8.2.4
99 not known or not detectable
<rscp>:
Integer type. Received signal code power (see 3GPP TS 25.133 [95] subclause
9.1.1.3
and 3GPP TS 25.123 [96] subclause 9.1.1.1.3).
0 rscp < -120dbm
1 -120 dBm <= rscp < -119 dBm
2 -119 dBm <= rscp < -118 dBm
: : : :
94 -27 dBm <= rscp < -26 dBm
95 -26 dBm <= rscp < -25 dBm
96 -25 dBm <= rscp
255 not known or not detectable
Note:
Values between -115dbm and -120dbm will all be represented by level 0.
<ecno>:
Integer type. Ratio of the received energy per PN chip to the total received power
spectral density (see 3GPP TS 25.133 [95] subclause).
0 Ec/Io < -24 dB
1 -24 dB <= Ec/Io < -23.5 dB
2 -23.5 dB <= Ec/Io < -23 dB
: : : :
47 -1 dB <= Ec/Io < -0.5 dB
48 -0.5 dB <= Ec/Io < 0 dB
49 0 dB <= Ec/Io
255 not known or not detectable
<rsrq>:
To Next Page
