Fibocom L860-GL - Page 142

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 142 of 254
Command
Description
Integer type. Reference signal received quality (see 3GPP TS 36.133 [96] subclause
9.1.7).
0 rsrq < -19.5 dB
1 -19.5 dB <= rsrq < -19 dB
2 -19 dB <= rsrq < -18.5 dB
: : : :
32 -4 dB <= rsrq < -3.5 dB
33 -3.5 dB <= rsrq < -3 dB
34 -3 dB <= rsrq
255 not known or not detectable
<rsrp>:
Integer type. Reference signal received power (see 3GPP TS 36.133 [96] subclause
9.1.4).
0 rsrp < -140 dBm
1 -140 dBm <= rsrp < -139 dBm
2 -139 dBm <= rsrp < -138 dBm
: : : :
95 -46 dBm <= rsrp < -45 dBm
96 -45 dBm <= rsrp < -44 dBm
97 -44 dBm <= rsrp
255 not known or not detectable
Note:
This command is supported only from release 10.
Example AT+COPS?
+COPS: 0,0,"CHN-UNICOM",7
OK
AT+CESQ
+CESQ: 99,99,255,255,20,29
OK
Reference 3GPP TS 27.007