Fibocom L860-GL - Page 150

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 150 of 254
<lac>, <ci>, <AcT> and <rac>, if available, are returned only when <n>=2 and MT is registered in the
network.
Test command returns the range of supported network registration mode (i.e. <n>).
Command Description
Set [Function]
The Set command controls the presentation of an unsolicited result code "+CGREG: "
and the result of the Read operation.
[Syntax]
AT+CGREG=<n>
[Response/Action]
OK
or:
+CME ERROR: <err>
Read [Function]
The read command returns the status of result code presentation and an integer
<stat>which shows whether the network has currently indicated the registration of the
MT.
[Syntax]
AT+CGREG?
[Response/Action]
+CGREG: <n>, <stat>[,<lac>[,<ci>[,<AcT>[,<rac>[,<reject type>[,<reject cause>]]]]]]
OK
Test [Function]
The Test command displays the supported values of <n>.
[Syntax]
AT+CGREG=?
[Response/Action]
+CGREG: (list of supported <n>s)
OK