Fibocom L860-GL - Page 39

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 39 of 254
Command Description
Read N/A
Test [Function]
The test command only returns OK.
[Syntax]
AT+CRSM=?
[Response/Action]
OK
Parameters <command> Integer type. Command passed on by the ME to the SIM.
176 Read BINARY
178 Read RECORD
192 Get RESPONSE
214 Update BINARY
220 Update RECORD
242 STATUS
<file_id> Integer type. This is the identifier of a elementary data file on SIM. Mandatory
for every <command> except of STATUS.
<P1>,<P2>,<P3> Integer type. Parameters passed on by the ME to the SIM. These
parameters are man-
datory for every command, except GET RESPONSE and
STATUS.
READ BINARY
<P1> Offset high (0...255)
<P2> Offset low (0...255)
<P3> Length (0...255)
READ RECORD
<P1> Rec. No. (0...255)
<P2> Mode "02" = next record
"03" = previous record
"04" = absolute mode/current mode, the record number is given in P1 with P1='00'
denoting the current record.
<P3> Length (0...255)
GET RESPONSE