Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 40 of 254
Command Description
<P1> "00"
<P2> "00"
<P3> Length (0...255)
UPDATE BINARY
<P1> Offset high (0...255)
<P2> Offset low (0...255)
<P3> Length (0...255)
UPDATE RECORD
<P1> Rec. No. (0...255)
<P2> Mode "02" = next record
"03" = previous record
"04" = absolute mode/current mode, the record number is given in P1 with P1='00'
denoting the current record.
<P3> Length (0...255)
STATUS
<P1> "00"
<P2> "00"
<P3> Length (0...255)
<data> Information which shall be written to the SIM (hexadecimal character format).
Man-datory for UPDATE BINARY and UPDATE RECORD.
<pathid>
String type; contains the path of an elementary file on the SIM/USIM in
hexadecimal format as defined in ETSI TS 102 221 [60] (e.g. “7F205F70” in SIM and
USIM case).
<sw1>
<sw2> Integer character format. Information, from the SIM, about the execution of the
actual command. These parameters are delivered to the TE in both cases, on
successful or failed execution of the command.
<sw1>, <sw2>
integer type containing the SIM information and can be:
0x90 0x00 normal entry of the command
0x9F 0xXX length XX of the response data
0x91 0xXX normal ending of the command, with extra information from the proactive
SIM containing a command for the ME. Length 'XX' of the response data
0x92 0x0X update successful but after using an internal retry routine X times
To Next Page
