Fimap IMx - Solenoid Valve

4-42
4.5.5 Solenoid Valve
• Put the machine in safe conditions.
• Remove the Brush Deck Assembly
(see fig. ??).
• Unplug the hoses connected to the
Solenoid Valve (see fig. 4.5.5-102).
• Loose the plastic nut that block the
Solenoid Valve to its support (see fig.
4.5.5-103).
• Loose the solenoid Valve cap and re-
move the OR gasket (see fig. 4.5.5-104).
• Proceed at reverse to refit the part
(Position the spacer washer properly
to refit the valve).
4.5.5-102 4.5.5-103
4.5.5-104