Fimap IMx - 10 Accessories

10-88
Chapter 10
Accessories
10.1 Accessories List
• Splashguard Kit
• Onboard Charger Ki
• Extension Handlebar Kit
10.2 Splashguard Kit -
223227
10.2.1 Description
Even if the solution output is in the mid-
dle of the brush, on particular not ab-
sorbing kind of floors could be neces-
sary a Splashguard in order to avoid the
dispersing of the solution outside of the
scrubbing path. The Functioning of this
kit is absolutely equal to the other ones
similar to it.
10.2.2 Tools needed for the in-
stallation
• Wrench 8, 10.
10.2.3 Machine Preparation
Before to install the Splashguard kit is
necessary to secure the machine, release
the brush, switch off the machine and
unplug the batteries.
Move the blocking point of the bumper
wheel using the second hole on the
Brush deck frame.
10.2.3-1 Brush release 10.2.3-2 Machine switch-
ing off
10.2.3-3 Disconnection of
the batteries
10.2.3-4 Fitting hole for
the Bumper Wheel
Proceed to install the splashguard carter
included in the kit.
88