5-52
Operator Menu
To enter to the Operator menu go ahead
as follow:
• With the machine off, press in the
same time button “3”, “4” and “6”
• Turn on the key, with the three but-
tons pressed.
• Waiting the upload of the “working
menu”
• Release the buttons
To move inside of the menu, press the
button “4” and the button “6”.
To modify a parameter or confirm a
changed value, press the button “3”.
Change a Parameter (in the Operator
Menu)
To change a parameter proceed as fol-
lows:
• Run the menu with the button “4”
or “6” and select the parameter to
change.
• Select the submenu to be changed
pressing the button “3”
• Utilize the button “4” and “6”, to shift
all the available values for the pa-
rameter necessary to modify.
• To confirm the new value press the
button “3”
• To save the change is necessary to
return to the user menu; to exit from
“working menu” select the menu
“exit”
For example, to modify the language
from EN to IT
• Turn OFF the machine
• Press in the same time, the buttons
“3”, “4” and “6”
• Until the buttons are pressed, turn
ON the key and wait the upload of
the “working menu”
• Use the buttons “4” or “6” to select
the submenu “language”
• To modify the parameters of this
menu, press the button “3”. To con-
firm the possibility to change param-
eters, the first line on the display will
blink
• Utilize buttons “4” or “6” to shift all
the values on this menu and select
the value “IT”
• Confirm the new value by pressing
the button “3”
• To save this modification, select
the submenu “exit” and confirm by
pressing button “3”.
To Next Page
Loading...
