11
DMP30 / DMP40 Description
Counted Average scan mode active
Measured reading acquisition until the probe is lifted off, storage of the arith-
metic mean over the acquired measured readings
Indicates a block closure, appears with the last measured reading of the block
Offset function is active
The automatic storing of measured readings is deactivated
On/Off switch, – parameter/function is activated
On/Off switch, – parameter/function is deactivated
Parameter selection – parameter/function is activated
Parameter selection – parameter/function is deactivated
No. Number of the current block
n Number of measured readings
• Number of measured readings in the current/selected block
• Number of all measured readings in the current batch
Arithmetic mean of the current block with n measured readings
s Standard deviation for the arithmetic mean ; a measure for the variation
of individual measured readings (of a batch or block) around their common
mean value.
Min Lowest measured reading within a block
Max Highest measured reading within a block
R The range equals the difference between the highest and lowest measured
reading in a block or batch
O
x
x
To Next Page
Loading...
