flexfactory anyfeed SX Series User Manual

flexfactory ag Quick Setup Guide and User’s anyfeed SX Series 30
Command
Description
Syntax
Explanation
Response
Feed Forward
[ffwd]
Feed parts forward
> x=1<cr>
Executes a feed
forward
Standard
response
Feed Backward
[fbwd]
Feed parts backward
> x=2<cr>
Executes a feed
backward
Standard
response
Feed + Flip
Forward [flipfwd]
Feed + flip parts
forward
> x=3<cr>
Executes a flip
forward
Standard
response
Feed + Flip
Backward [flipbwd]
Feed + flip parts
backward
> x=4 <cr>
Executes a flip
backward
Standard
response
Flip [flip]
Flip parts without
moving forward or
backward
> x=5<cr>
Executes a flip
Standard
response
Dispense
[dispense]
Move parts from the
bulk container to the
feed surface
> x=6<cr>
Executes a dispense
Standard
response
Purge [purge]
Feed parts out
backwards, purge gate
must be opened
manually
> x=7<cr>
Executes a purge
Standard
response
Initialize [init]
Move the feeder into its
home position; required
before any other action
> x=16<cr>
Initializes the feeder
Standard
response
Stop [stop]
Stop current action and
move feeder to home
position
> x=15<cr>
Executes a stop
Standard
response
Startup feeder
firmware
Start feeder firmware
(stops active motions)
> S_RUN<cr>
Restarts feeder
firmware
m10<cr>
m20<cr>
(feeder is
online)
Reset error
Reset error status and
moves feeder to home
position
> x=30<cr>
Resets error status
Standard
response
Restart firmware
Restart feeder
firmware; resets to
default values
> x=31<cr>
Restarts feeder
firmware and resets
defaults
Standard
response

flexfactory anyfeed SX Series Specifications

General

Brand	flexfactory
Model	anyfeed SX Series
Category	Industrial Equipment
Language	English