flexfactory ag Quick Setup Guide and User’s anyfeed SX Series 8
1.3 ALERT NOTATION
There are four levels of special alert notation used in this manual. In descending order of
importance, they are:
This indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
This indicates a potentially hazardous situation which, if not
avoided, could result in serious injury or major damage to the
equipment.
This indicates a situation which, if not avoided, could result in
minor injury or damage to the equipment.
This provides supplementary information, emphasizes a point
or procedure, or gives a tip for easier operation.
Table 1-2 Alert Notation
1.4 SOAND EMISSIONS
Acoustic emission from the anyfeed SX may be up to 85 dB (A)
ander worst-case conditions. Typical values will be lower,
depending on the type of parts being fed, speed, and payload.
Appropriate safety measures should be taken against excessive
acoustic emission, such as using ear protection and displaying a
warning sign.
1.5 WORKING AREAS
The robot systems used with the anyfeed SX have a Manual and an Automatic operating
mode. While in Automatic Mode, personnel are not allowed in the workcell. In Manual
mode, safety procedures and rules defined in the robot documentation must be followed.
Electrical Hazard!
Impact Hazard!
Never remove any safeguarding and never make changes in the
system that will decommission a safeguard.
To Next Page
Loading...
Need help?
General