flexfactory anyfeed SX Series User Manual

flexfactory ag Quick Setup Guide and User’s anyfeed SX Series 32
Set Purge
Repetitions
Set number of
repetitions for
purge
> ab[7]=[turns]<cr>
Sets repetitions
No
response
Set Purge
Repetitions and
execute purge
Set number of
repetitions for
purge and
execute motion
> ab[7]=[turns]_x=7<cr>
Sets repetitions
and executes
motion
Standard
response
Set Heavy
Dispense
Repetitions
Set number of
repetitions for
heavy dispense
> ab[8]=[turns]<cr>
Sets repetitions
No
response
Set Heavy
Dispense
Repetitions and
execute heavy
dispense
Set number of
repetitions for
heavy dispense
and execute
motion
> ab[8]=[turns]_x=8<cr>
Sets repetitions
and executes
motion
Standard
response
Setting the Speed of Operation
Set Feed Forward
speed
Set speed of feed
forward operation
> ab[17]=[speed]_x=17<cr>
Sets speed
Standard
response
Set Feed
Backward speed
Set speed of feed
backward
operation
> ab[18]=[speed]_x=18<cr>
Sets speed
Standard
response
Set Feed + Flip
Forward speed
Set speed of flip
forward operation
> ab[19]=[speed]_x=19<cr>
Sets speed
Standard
response
Set Feed + Flip
Backward speed
Set speed of flip
backward
operation
> ab[20]=[speed]_x=20<cr>
Sets speed
Standard
response
Set Flip speed
Set speed of flip
operation
> ab[21]=[speed]_x=21<cr>
Sets speed
Standard
response
Set Dispense
speed
Set speed of
dispense
operation
> ab[22]=[speed]_x=22<cr>
Sets speed
Standard
response
Set Purge speed
Set speed of
purge operation
> ab[23]=[speed]_x=23<cr>
Sets speed
Standard
response
Set Heavy
Dispense speed
Set speed of
heavy dispense
operation
> ab[24]=[speed]_x=24<cr>
Sets speed
Standard
response
Other Settings
Backlight/Strobe
mode
Set the state of
the optional
Backlight (if
installed)
> ab[12]=[mode]
Mode: 0:
Backlight is OFF
1: Backlight is ON
(default)
2: Backlight is
strobed
(controlled by
settings “trigger
interval” and
“trigger delay”)
No
response

flexfactory anyfeed SX Series Specifications

General

Brand	flexfactory
Model	anyfeed SX Series
Category	Industrial Equipment
Language	English