EM100-C User Manual
0084292
Page 20 of 81
3.4. Driver Check
During the first session, it may be necessary for the PC to install appropriate drivers. If using a CAN
adaptor or USB-to-serial converter, consult the manufacturer for instructions and latest drivers.
If using the USB CDC connection, the following driver from STMicroelectronics will need to be
installed. View the ST.com website for the latest revision:
http://www.st.com/en/development-tools/stsw-stm32102.html
An installation manual is available from the Flintec website (www.flintec.com
).
To Next Page
